GPS-Action 1.0

• Free Download
• Review
• Share
• Compatible Phones

GPS-Action software sets automatic alarms and performs different actions according to the GPS and Cell position of the mobile phone.

You can launch the application, which you have selected, launch the desired document or change the profile or a Buetooth status of your mobile phone when achieving some geographical position.

Application may fire alarm and display a custom note as soon as you reach your destination.

All actions are performed without any user interaction, only using the location based information.

You have no GPS inside your mobile? No problem! GPS-Action works also with CellID information that is available to all devices without GPS module.

Nokia native landmarks are included automatically into the application.

There are two types of location positioning: GPS positioning and Cell positioning. GPS positioning is very precise. It is achieved via satellite and it is available for the devices with built-in GPS or external GPS-receiver. This location type has its drawback: connection to the satellite is not possible through walls. So if you are inside, your GPS position will most probably not be retrieved.

For this case, and also for the devices without built-in GPS receiver, we have the second positioning type: location by Cells. Cells are available at all GSM operators, it is the mast where your mobile is receiving the information about the GSM network and your mobile operator. This info is available everywhere, where the GSM network is available. However, the CellID positioning is not so precise. As the GPS positioning, sometimes cells are situated far from each other, so the area for your landmark can be vast enough

Key Features:

• Alarms and actions performed silently, as soon as the geographical target is achieved
• Recurring alarms and actions with many scheduling conditions
• Variety of actions include: change profile, change BT status, open document, launch application, launch website.
• Action frequency can be restricted for the case you are approaching the same landmark more then once
• Time range for the action or alarm can be restricted, you will not be bothered at night.
• Two types of geo positioning: based on GPS and Cell information
• Available for all Series 60.3 devices, even to those without GPS receiver.
• Full synchronisation with native Nokia Landmarks
• Minimal alarm playtime can be set, as well as personalized alarm note
• Customizable alarm sound for every single alarm.

Registration Information:

The trial version of the software is limited for 10 days. The full version of the software is obtained by a license code provided upon purchase. The license code is based on the unique IMEI provided and the application can be used exclusively on the device it is licensed for. The license cannot be retrieved and applied to other devices.